How do I maintain my mailpost of Mayne?
Our mailbox posts are designed to be maintenance free, and usually only require the occasional rinse with a garden hose. But if a more serious cleaning is necessary due to extremely dirty atmospheric conditions, a soft bristled brush with detergent or even a mild bleach solution in conjunction with a light power washer will do the trick. Cleaning products should always be tested on a hidden section of your product before using on exposed areas.
|
Mailbox Installation
Product Installation:
Tools Required:
- Shovel - Level
- Tape measure - Ratchet wrench
- Cordless drill - Phillips drill bit
- 7/16?socket
- Short handled Phillips screwdriver
- 3/8?drill bit required for Rockport
Optional Items:
- Quick set concrete
- Address plaques
- Flowers for the planter (Signature Plus and Westbrook Plus models)
Installation Summary (see instruction sheets for specific details):
1. Dig a hole approximately 3ft deep.
2. Set a 7ft 4”x4?wood post (not included) into the hole leaving about 4 ft remaining above ground.
3. For added strength we recommend setting the post in place with quick set concrete mix.
4. Ensure the post is level and allow time for the concrete to cure before proceeding to the next step.
5. Slide the decorative Mayne mail post over the wood post. Make sure the bottom of the decorative posts sits flush on ground.
6. Using the hardware provided attach the mailbox arm to the post. Instructions provided with each post style include specific installation details. Note: For the Dover and Signature Plus you will need to preassemble the paper holder/mailbox arm before attaching it to the post.
7. Using the hardware provided attach the planter to your decorative post (planter applies to the Signature Plus and Westbrook Plus models).
8. As a final step attach your mailbox (not included) and optional address plaques (not included).
Note: 4x4 wood posts, mailboxes and mailbox mounting hardware NOT included with any Mayne mailbox posts.
?We recommend a medium mailbox (approx. 7.5”width x 10”height x 20?length)
?Weight suggestion is 4lbs to 14lbs (heavier boxes can be accommodated by securing one or two lag bolts through the back of the mailbox directly into the post)
?The paper holder/mailbox is molded specifically to allow the mailbox to sit directly on the arm (no brackets or mounting plate needed).
1. Inside most medium sized mailboxes there are 4 holes in the floor of the box. Set the mailbox on the arm and mark the location of these holes.
2. Remove the mailbox from the arm and pre-drill the 4 holes through the plastic arm with a 3/8?drill bit.
3. Set the mailbox back on the arm and secure it with 4 nuts and bolts. Using a 1 ¾” bolt is adequate for most mailboxes.
NOTE: For the Rockport we recommend a medium mailbox (approx. 7”width x 9.5”height x 20?length) with a weight suggestion of approximately 4lbs to 8lbs.ts not us
|
Solar Light Installation Instructions
Solar Light Installation Instructions
1. Set light assembly in place on post top
2. Remove cap from lens housing by turning counter clockwise
3. Install the four screws in adaptor (access through hole in top of lens housing)
4. Remove plastic tab from bottom of cap to activate batteries
5. Reinstall cap on lens housing
Battery Installation
Remove plastic strip from battery as shown in Figure A.
IMPORTANT PLEASE READ BEFORE ASSEMBLY
To assure maximum battery contact for charging and illumination, the battery holders in your solar light are constructed in such a manner as to assure a tight fit at all times. It may be necessary for you to twist and/or turn the batteries slightly as they are inserted and also once they are in place to assure proper contact.
If your light does not appear to be working properly please try the following: (from a technological standpoint there is very little that can go wrong with this product)
?Make certain batteries are inserted properly. . .see (+) and (? markings
?Move the batteries back and forth slightly to ensure proper contact
?Make certain that the batteries are charged (expose the solar panel on the assembled fixture to at least one full day of bright sun.)
?Replacement batteries must be AA 600mAh Ni-Cd.
TWO-YEAR WARRANTY
If within two (2) years from the date of purchase, this product fails due to a defect in material or workmanship, Monarch will repair or replace it, at its sole option, free of charge. This warranty applies only to the original purchaser and is not transferable.
MONARCH WILL NOT BE LIABLE FOR INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS OR IMPLIED WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY MODIFIED TO EXIST ONLY AS CONTAINED IN THIS LIMITED WARRANTY, AND SHALL BE OF THE SAME DURATION AS THE WARRANTY PERIOD STATED ABOVE. SOME STATES DO NOT ALLOW LIMITATIONS ON THE DURATION OF AN IMPLIED WARRANTY, SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
The warranty does not apply to: (a) damage caused by accident, abuse, in handling, dropping; (b) acts of God; (c) units which have been subject to unauthorized repair, opened, taken apart or otherwise modified; (d) units not used in accordance with directions; (e) damages exceeding the cost of the product; (f) sealed lamps and/or lamp bulbs, LED's and batteries; (g) the finish on any portion of the product, such as surface scratches and/or weathering, as this is considered normal wear and tear. Some states do not allow a limitation of damages so the foregoing limitation may not apply to you. This warranty gives you specific legal rights and you may also have other rights, which vary from state to state.
Warranty service is available by mailing postage prepaid to the authorized service station listed below. Please be sure to wrap the product securely when mailing to avoid shipping damage.lity
|
About Polyethylene
About Polyethylene
Our products are manufactured by molding premium high-grade polyethylene around modern structural elements to provide long-lasting beauty, durability and quality.
Imagine the freedom of an almost maintenance free mailbox post and other outdoor products. No painting, no treating, no sealing? just enjoying, enjoying, enjoying. Unlike wood, Mayne products keep their good looks year after year with just an occasional rinse with a garden hose. That’s the real beauty of the entire family of products from Mayne.
Color Selection
In addition to white, all of our mailbox posts are available in 3 other colors - black, clay and granite. r
|
Mailbox Installation Instructions
|
Maintenance Free
How do I maintain my Mayne Mail Box post?
Our mailbox posts are designed to be maintenance free, and usually only require the occasional rinse with a garden hose. But if a more serious cleaning is necessary due to extremely dirty atmospheric conditions, a soft bristled brush with detergent or even a mild bleach solution in conjunction with a light power washer will do the trick. Cleaning products should always be tested on a hidden section of your product before using on exposed areas.
|
Warranty
What does the warranty cover?
Any defects in materials and workmanship.
How long will the warranty be effective?
For 15 years of the original owner of the real estate upon which this product is used.
Who can make a claim?
Only the original purchasing owner. Proof of purchase must be provided. This warranty is not transferable.
What is not covered by this warranty?
Damage caused by failure to comply with Mayne installation guidelines, by faulty installation, improper application, or in violation of codes or restrictions.
Damage attributable to fire, violent storms, earthquake, ground movement or any other casualties; or to exposure of atmospheric pollutants or conditions other than natural weathering processes.
Damage or discoloration due to misuse, abuse, improper storage, impact of objects, or to the alteration of the product by applied heat or welding, by contact with solvents, epoxies, paints, chemicals or other substances; or by other physical or material alterations.
Color fading that occurs over time due to normal weathering.
Any materials not manufactured or supplied by Mayne.
Cost of installation, removal, labor, freight and similar related costs.
Any incidental or consequential damages.
Are there any other considerations?
The manufacturer of this product does not recommend or approve this product for all possible end use applications. Your local Code Authority should be consulted regarding its safety and applicability for intended usage.
This warranty gives you specific and legal rights, and you may also have other rights which may vary from state to state, or province to province.
The warranty statements contained in this limited warranty set forth the only express warranties extended by Mayne for its products. The provisions of this warranty shall constitute the entire liability of Mayne and the property owners exclusive remedy for breach of the warranty. Mayne disclaims any implied warranty or merchantability or fitness for any particular purpose.
|
Shipped Quickly With Care
Mayne mailbox posts normally ship within 2-4 business days following the placement of your order. They ship UPS and are carefully packaged to prevent damage to your mailbox post.
Tracking numbers can be provided upon request.
Once you receive your Mayne mailbox post, carefully inspect it to make sure that it is in good condition. If it is damaged, contact our customer service manager at 866-272-6773 and we will replace it, free of charge.
|
Frequently Asked Questions
Frequently Asked Questions
What is your Guarantee policy?
Our products come with a 15 year warranty that covers any defects in materials and workmanship.
What are Mayne mail posts made of?
Mayne mail posts are rotomolded using high quality polyethylene. The resin includes built in UV inhibitors offering long lasting protection from the elements (products won’t yellow or discolor).
What is included with a Mayne mailbox post?
We include the decorative post, mailbox arm, and planter (planter applies to our Newport and Westbrook models). In the arm package you’ll find the necessary hardware and instruction sheets for that particular model.
How are Mayne posts installed?
Mayne mail posts install easily over a 4x4 wood post (pressure treated recommended). The wood post is NOT included and can be purchased from your local hardware or lumber retailer. For added strength we recommend securing the wood post in place with quick set concrete.
How difficult will my product be to assemble?
Assembly is rated as moderate and of course depends on the mail post and the person assembling. All mail posts come with detailed instructions and technical support is available to help you with assembly.
Are mailboxes included with Mayne mailbox posts?
No, mailboxes are NOT included. Due to the various styles, sizes, and price points we encourage to the customer to purchase their own mailbox from their local hardware store or preferred online retailer.
How do I mount my mailbox on a Mayne post?
Mailboxes are typically mounted using brackets, mounting plates, or by securing the box directly to the arm using screws or bolts. The Newport Plus and Westbrook Plus require mounting brackets or plates. The Dover, Signature Plus, Rockport, and Liberty posts have mailbox arms that are molded specifically to allow the mailbox to sit flush on the arm. The box can be secured using a nut and bolt combination (typically four 1 ¾” bolts is adequate).
Can I paint a Mayne mail post?
While there are paints available for vinyl products nothing has been made specifically for polyethylene. We don’t recommend painting your Mayne products and choosing to do so is done at your own discretion and will void your warranty.
Can I purchase address plaques?
Yes, various styles are available that mount on this side of the paper holders, planters, and vertically in the inset panel of the post. These items are available through Whitehall Products (Tel: 800-728-2164).
What is the best way to care for my Mayne mail post?
To clean your Mayne products simply wash with water and soap solution. For best results we recommend using a pressure washer.
|